Polyurethane Adhesive / Resin / Glue Raw Materials as Blend Polyol and Isocyanate

• Customization: Available
• CAS No.: 9002-86-2
• Formula: -Nhoco-CH2-2o-Conhch2-6nhco-
• Model NO.: KAQIN
• EINECS: 618-449-1
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Yellow
• Fire Retardant: B2, B3
• Drum Color: Blue, Green
• Ratio: 1.1-1.7
• Raw Material: Polyurethane, Polyisocyanurate
• Foam Close: 92%
• Form: Liquid
• Transport Package: Drum, IBC, ISO Tank, Flexible Bag
• Specification: 200kg/drum, 4drums/pallet, 1000kgs/IBC
• Trademark: KAQIN
• Origin: China
• HS Code: 390729
• Production Capacity: 60000tons/Year

Product Description

Shanghai KaQin Chemical
Technology Co.,Ltd
AsiaPacific

KaQin ® KQ-6606


1. GENERAL PROPERTIES AND APPLICATIONS

KQ-6606 is a pent ane blown system produced in China and used to produce rigid polyurethane foam intended specifically for use as a continuous panel systems. It contains all the additives necessary for foaming except blowing agent pen tane and catalyst.

2. ANALYTICAL  DATA
 

Property Water content Viscosity, 25 ° C Density,    25 ° C

Value 0.55±0.15 700±150 1.16±0.02

Units % mPas g/cm3

Test method 2201-0212401-90D 2201-0212101-90D DIN 51757

 

3. GUIDE  FORMULATION

KQ-6606                          100                  pbw
KQ-532                            2.0                   pbw
Pen  tane                         7.8                   pbw
MDI(optional 400 Vis)      186                 pbw
                      
4.LABORATORY  REACTION PROPERTIES (25 °C  stirring  speed  3000  p.m.r )

 

Stirring time	5	s
Cream time	7±3	s
Gel time	52±5	s
Tack free time	75±15	s
Free-rise core density	36±1.0	kg/m³

The product has a shelf life of 3 months after delivery, provided it is stored in moisture-tight containers at about 20ºC.
 

 

5.Typical characteristics:
------- Good flow properties                      ------- Good density distribution
------- High compression strength            ------- Good dimensional stability
------- Very good adhesion with steel panel when facings preheating.
-------  B2 fire retardant grade according to China Standard GB8624

6. HANDLING  PRECAUTIONS

KQ-6606 is a polyol-based product containing, among other substances, a small percentage of tertiary aliphatic amines.
Due to its alkaline nature, KQ-6606 can cause slight to moderate irritation on direct contact with the skin, eyes and mucous membranes, particularly if contact is prolonged.
Splashes in the eyes should be removed immediately by careful flushing with copious amounts of water. If irritation persists, medical attention should be obtained.
Splashes on the skin should be wiped off immediately, after which the contaminated areas
should be thoroughly washed with soap and water. A good barrier cream should then be applied.
Contaminated clothing should be removed immediately to prevent further skin contact and thoroughly cleaned before reuse. The product should be kept away from food, drink and tobacco.

Shanghai KaQin Chemical Technology Co.Ltd
                                                                                                                                               
Our technical advice - whether verbal, in writing or by way of trial - is given in good
faith but without warranty, and this also applies where proprietary rights of third parties are involved. It does not release you from the obligation to test the products supplied by us as  to their suitability for the intended processes and uses. The application, use and processing of the products are beyond our control and, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you. We will, of course, provide products of consistent quality within the scope of our General Conditions of Sale and Delivery.